|
|
27.8 oz-in. |
|
0.08 sec/60° |
Uses a 3F Standard Spline (25T)
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts Only
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.08sec/60 degrees at no load
Stall Torque (4.8V): 27.8 oz/in. (2.0 kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 7.9"
Dimensions: 1.40" x 0.59"x 1.13" (35.5 x 15 x 28.6mm)
Weight: .92oz. (26g)}
Detailed Specifications
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
