Control System: +Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 6.6V - 7.4V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (6.6V): 0.07sec/60 degrees at no load
Operating Speed (7.4V): 0.06sec/60 degrees at no load
Stall Torque (6.6V): 272.2 oz/in. (19.6kg-cm)
Stall Torque (7.4V): 305.6 oz/in. (22.0kg-cm)
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Metal
Connector Wire Length: 12"
Dimensions: 1.59” x 0.83” x 1.47” (40.5 x 21 x 37.4mm)
Weight: 2.72oz. (77g)
Detailed Specifications
|
|
305.6 oz-in. |
|
0.06 sec/60° |
S9353HV included hardware.
The Futaba S9353HV High Voltage HT/HS Servo features a metal upper case to resist breaking on hard landings and provides plenty of torque (306 oz-in @ 7.4V) for competitive crawling. The standard size servo makes it ideal for 1/8 off-road drivers and it’s .06 speed makes it super fast when used with a 2S LiPo battery!
Uses a 3F Standard Spline (25T)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
