|
Our new Direct Drive Pan & Tilt System is perfect for cameras or sensors up to 2 lbs. One of the biggest problems with servos is they can not always handle heavy side loads even though they may have the power to rotate your attachment. As you can see from the pictures, our system incorporates 1/4” shafts supported by dual ball bearings and rigid 1/4” ABS plastic which makes it the most rigid and precise direct drive pan and tilt available. Three 1/4” holes in the top plate make it extremely easy to mount any camera or sensor. This plate can also be easily drilled to accept other attachments. The Direct Drive Pan & Tilt System can use any standard size Hitec servo. For cameras up to 1 lb, the HS-645MG or the HS-475HB servos work very well. For cameras up to 2 lbs, we suggest the HS-985MG or for the ultimate pan and tilt, the HSR-5995TG. If you are needing more than 90° of movement in either the pan or tilt, you can order servos from us pre-modified for this on the Hitec servo pages. Unit comes unassembled with full instuctions. If you have any questions please call or email.
|
