Shop By Product

15V - 30V, 50A Power Supply

  • in box
  • right side view
  • included AC Power cord
  • back view
1 of 6

Be the first to review this product

$223.99 Sign up for Price Alert
In stock
This Product? Share It!


To complement their growing set of DC/DC chargers, Hitec is proud to introduce the ePowerBox 50A power supply. It provides 50 amps of current with an input voltage range from 100VAC to 240VAC and an adjustable output of 15-30 VDC. Whether you are a demanding racer or pilot, the ePowerBox 50A delivers the power you need whenever you need it. Its easy-to-read backlit LCD screen displays voltage and amperage output clearly and conveniently.


  • 1200 Watt, 50-Amp AC/DC Power Supply
  • Adjustable DC Output Voltage 15 ~ 30V
  • AC Input Voltage 100 ~ 240V
  • One 50-Amp and Three 10-Amp Output Ports (with On/Off Switch)
  • Two 5V USB Output Ports
  • 89% Power Efficiency
  • Active Power Factor Correction (PFC)
  • Dual Smart Fan Cooling

To take full advantage of this power supply’s 1200-watt power capability, the output voltage should be 24VDC or higher. The actual amount of output current fed to the load is limited to 1200 watts. The chart below shows the actual wattage and amperage available at each voltage setting.

44213 chart

44213 drawing

Product Weight 6.8lbs. (3.08kg)
Dimensions 12.0 x 6.7 x 3.3 in (305 x 170 x 85 mm)
Input Supply Voltage Range AC Input Voltage 100 ~ 240V
Input Plug Style NEMA 5-15 grounded (Type B)

When using a power supply in place of a battery, make sure that the amperage is equal to or greater than the amp draw of the item you intend to power. If the amp rating of the power supply is lower than the item it is powering the performance will be diminished. For example, if you power a 12V motor with 400oz-in of torque and an amp draw of 5A with a 12V, 2.5A power supply, the motor will not be able to exert the full 400 oz-in of torque since it requires more than 2.5A to do so. It is okay, however, to have a power supply that is rated for more amps than what the item you intend to power will draw. This will not harm it in any way since electronic devices only pull the necessary amps from the power source. Some power supplies will also vary between their rated voltage and true voltage output. Before plugging a power supply in, it is always a good idea to check the true voltage output so that you do not accidentally damage the components that you wish to power.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.