Shop By Product

3 Wheel Robot Platform

  • Shown next to a can for scale
  • The ball bearing swivel along with the ball bearing supported 4” wheel at the rear enables smooth turning transitions
  • Pictured with a MPT1100-SS Pan and Tilt system (not included) mounted to the platform
  • Pictured with a MPT1100-SS Pan and Tilt system (not included) mounted to the platform
  • Shown next to a can for scale
  • Pictured with a MPT1100-SS Pan and Tilt system (not included) mounted to the platform
  • Close up of the motor mounted to the channel and the hub adaptor attached to the motor
  • Top view
  • Large 6” diameter drive wheels with rubber lips offer fantastic traction
  • Pictured with a MPT1100-SS Pan and Tilt system (not included) mounted to the platform
  • Included parts (see parts list below)
  • Pictured with a MPT1100-SS Pan and Tilt system (not included) mounted to the platform
1 of 13

Be the first to review this product

Part
637134
637134
Status
In stock
This Product? Share It!

Details

Start your Actobotics project with this 3 wheel robot platform! Includes all the mechanical parts needed to build an omni-directional robot. Large 6” diameter drive wheels with rubber lips offer fantastic traction. The ball bearing swivel along with the ball bearing supported 4” wheel at the rear enables smooth turning transitions. As you can see below, the chassis can easily be reconfigured and accepts all Actobotics components. The included motor mounts are compatible with our 3-12V gearmotors (drive motors sold separately).  Other types of drive motors can be used as well, please see our line of additional Actobotic motor mounts.  Assembly tools needed: 3/32” allen driver and 7/64” allen driver.  Watch the step by step assembly video.

SPECS

INCLUDED PARTS:
(2) 6” Heavy Duty Wheels
(1) 4” Heavy Duty Wheel
(2) 12” Aluminum Channel
(2) Hub Adaptor D
(2) 6mm Bore Set Screw Hubs
(1) 1/4” x 2.25 D-shaft
(2) 1/4” Collar
(2) 1/4” ID x 1/2” OD Flanged Ball Bearings
(1) Swivel Hub
(1) 45 Degree Channel Bracket
(2) Clamping Aluminum Motor Mounts
(1) Aluminum Hub Spacers (1” thick)
(1) 1/4” Shafting & Tubing Spacers
(1) 1/4” x 6-32 Socket Head Screws (25pk)
(1) 1/2” x 6-32 Socket Head Screws (25pk)
(1) 3/8” x 6-32 Socket Head Screws (25pk)
(1) 1/4” Bore Set Screw Hub

REQUIRED TOOLS (not included):
3/32” allen driver 
7/64” allen driver

Product Weight 2.55 lbs
Tire Size 6"
Motor Size Compatibility 3-12V Standard Spur Gearmotors (or equivalent size)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2016 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.