Shop By Product

5201 Series, 26:1 Ratio, 210 RPM Spur Gear Motor w/Encoder

1 of 9
GET A BACK IN
STOCK ALERT

Be the first to review this product

Part
5201-0002-0026
5201-0002-0026
Status
Out of stock
This Product? Share It!

Details

goBILDA 5201 Series Spur Gear Motors come equipped with a 6mm D-shaft so you can slide any 6mm bore hub, gear, sprocket or pulley on the shaft for a robust and reliable connection. The attached encoder provides precise feedback so you can accurately control your device using various sensors. The face of the gearbox has six M3 holes to fasten the gear motor to a face-style motor mount, or you can opt to clamp around the 37mm diameter gearbox allowing you to move the motor forward and aft to adjust the alignment. Given the offset nature of the motor shaft, adjusting gear-mesh can be accomplished by rotating the motor inside of a clamping mount. Competing in FTC? These spur gear motors utilize the FTC approved Modern Robotics/MATRIX 12 DC Motors.

SPECS

Stalling this gear motor could cause gear damage.

*At Nominal Voltage

Voltage (Nominal) 12V
Speed (No Load)* 210 RPM
Current (No Load)* 0.25A
Current (Stall)* 9.2A
Torque (Stall)* 380 oz-in
Gear Ratio 25.83:1
Gear Material Metal
Gearbox Style Spur
Motor Type DC
Output Shaft Diameter 6mm
Output Shaft Style d-shaft
Electrical Connection Motor: 3.5mm Bullet Connectors , Encoder: 4-Pos JST XH
Wire Length 18.50in (470mm) (including connectors)
Product Weight 332g
Encoder: Cycles Per Revolution (Motor Shaft) 7 (Rises of Ch A)
Encoder: Cycles Per Revolution (Output Shaft) 180.81 (Rises of Ch A)
Encoder: Countable Events Per Revolution (Motor Shaft) 28 (Rises & Falls of Ch A & B)
Encoder: Countable Events Per Revolution (Output Shaft) 723.24 (Rises & Falls of Ch A & B)
Encoder Type Relative, Quadrature
Encoder Sensor Type Magnetic (Hall Effect)
Encoder Sensor Input Voltage Range 3.3 - 5VDC
Encoder Sensor Output Pulse Amplitude ~= Sensor Input Voltage
RESOURCES

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.