D485HW Servo
Replacing the standard-size HS-5485HB and HS-5495BH servos, the sport class D485HW brings faster response and accuracy to your various radio control needs with D-series high resolution 32-bit technology and wide voltage operation.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
88°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
147°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
147°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
121°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
203°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
203°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Specs
| Output Shaft Style | H25T Spline |
|---|---|
| Voltage Range | 4.8 V - 7.4 V |
| No-Load Speed (7.4V) | 0.15 sec/60° |
| No-Load Speed (4.8V) | 0.20 sec/60° |
| Stall Torque (4.8V) | 67 oz-in (4.82 kg.cm) |
| Stall Torque (7.4V) | 103 oz-in (7.41 kg.cm) |
| Max PWM Signal Range | 850-2350 μsec |
| Travel per µs (Stock) | .098°/μsec |
| Max Rotation (Stock) | 147° |
| Pulse Amplitude | 3-5 V |
| Operating Temperature | -20°C to +60°C |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 1 µs |
| Motor Type | 3 Pole Cored Carbon Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Top Ball Bearing |
| Gear Material | MK 1st Gear & 3 Karbonite Resin Gears |
| Wire Length | 11" (279.4 mm) |
| Weight | 1.59 oz (45.0 g) |
| Max Rotation (reprogrammed) | 203° |
| Travel per µsec (reprogrammed) | 0.135°/μsec |
| Servo Size | Standard |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the D485HW Servo.
goBILDA
