Shop By Product

ePowerBox 17A Switching Power Supply

  • Discontinued
  • side view
  • in box
  • side view
  • side view
1 of 5


This product has been discontinued.  This extremely efficient power supply converts 100~240 AC volts into 17 amps of continuous 13.8 volt DC power, making it compatible with a wide variety of DC chargers.


  • #44216 ePowerBox 17
  • DC Input Power Cable
  • AC Power Cord
  • Banana Plugs


Special Features:

  • Wide Voltage Input Range of 100-420VAC for Worldwide Operation
  • Active Power Factor Correction for a Lower AC Input Current and Less Interference
  • Lightweight and Compact
  • Two DC Power Outputs
  • ON/OFF Power Switch
  • 9 LED Indicator Lights Display Output Current Draw
  • Built-in 5V/2.1A USB Power
  • Smart Fan Cooling System
  • Temperature Protection Circuit
  • Built-in Safety Features
  • Works Seamlessly with the X1 Pro Charger

AC Input Voltage Frequency: 50-60Hz
Current Overload Protection: > 17.5A 55ms
Input Current Protection: 5A Fuse
Output Voltage Ripple: <150mV
Power Efficiency: 91%
Power Factor: >0.98
Temperature Protection Cutoff: >65ºC
Cooling Method: Temperature Controlled Fan


Product Weight 21 oz (1.31 lbs)
Dimensions 5" x 3.6" x 2" (125.7x92.7x50.2mm)
Input Supply Voltage Range 100~240 Volts AC
Input Plug Style NEMA 5-15 grounded (Type B)
Output Voltage 13.8 Volts DC +/- 0.2V
Output Current 5V / 2.1A
Operating Temperature 0-40ºC

When using a power supply in place of a battery, make sure that the amperage is equal to or greater than the amp draw of the item you intend to power. If the amp rating of the power supply is lower than the item it is powering the performance will be diminished. For example, if you power a 12V motor with 400oz-in of torque and an amp draw of 5A with a 12V, 2.5A power supply, the motor will not be able to exert the full 400 oz-in of torque since it requires more than 2.5A to do so. It is okay, however, to have a power supply that is rated for more amps than what the item you intend to power will draw. This will not harm it in any way since electronic devices only pull the necessary amps from the power source. Some power supplies will also vary between their rated voltage and true voltage output. Before plugging a power supply in, it is always a good idea to check the true voltage output so that you do not accidentally damage the components that you wish to power.

Docks directly to the X1 Pro Charger!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.