Shop By Product

HS-5085MG Servo

  • HS-5085MG in box
  • HS-5085MG side view
  • HS-5085MG included hardware
  • HS-5085MG with quarter for scale
  • HS-5085MG back view
  • HS-5085MG top view
1 of 7

Be the first to review this product

$39.99 - $59.99
Sign up for Price Alert
Out of stock
This Product? Share It!


This product has been discontinued on ServoCity.  Nearly 60 oz.-in. of torque in a micro servo is amazing! Not only does the all new HS-5085MG give you power, it also offers excellent centering, resolution and, durability for those looking to save weight without sacrificing performance. An absolutely perfect choice for smaller airplanes, heli’s, boats, cars, trucks, and robots. The HS-5085MG offers a fine balance between speed and torque, incorporating the standard size Hitec spline means that all of your servo horns from standard size Hitec servos work with the HS-5085MG.

HS-5000 Series Schematic A = .51” (12.9mm)
B = .402” (10.2mm)
C = .976” (24.8mm)
E = .264” (6.7mm)
F = .872” (22.15mm)
G = .409” (10.4mm)
H = .772” (19.6mm)
J = 1.565” (39.75mm)
K = .390” (9.9mm)
L = .179” (4.55mm)
M = 1.136” (28.85mm)
X = .140” (3.56mm)
Dimensions 1.14" x 0.51"x 1.18" (29 x 13 x 30mm)
Product Weight 0.77oz (21.9g)
Output Shaft Style 24 tooth (C1) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.17sec/60°
No-Load Speed (6.0V) 0.13sec/60°
Stall Torque (4.8V) 50oz/in. (
Stall Torque (6.0V) 59.7oz/in. (
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .083°/μsec
Travel per µs (reprogrammed normal res) .120°/μsec
Max Travel (out of box) 125°
Max Travel (reprogrammed normal res) 180°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (4.8V) 3mA
Current Drain - idle (6.0V) 3mA
Current Drain - no-load (4.8V) 200mA/idle
Current Drain - no-load (6V) 240mA/idle
Current Drain - stall (4.8V) 2A
Current Drain - stall (6V) 3A
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Carbon Brush
Potentiometer Drive 6 Slider Indirect Drive
Internal Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material Metal
Wire Length 7" (178mm)
Wire Gauge 28AWG

General Servo Information:

Servo Tech Tip Videos:

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2020 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.