Shop By Product

HS-5645MG Servo

  • HS-5645MG top view
  • HS-5645MG side view
  • HS-5645MG with quarter for scale
  • HS-5645MG in box
  • HS-5645MG back view
  • HS-5645MG included hardware
1 of 7
GET A BACK IN
STOCK ALERT

Be the first to review this product

Price
$39.99
$39.99 - $69.99
Sign up for Price Alert
Part
35645S
35645S
Status
Out of stock
This Product? Share It!

Details

This product has been discontinued on ServoCity.  The digital version of Hitec's popular HS-645 is the HS-5645MG, featuring a programmable digital circuit and our custom MP/metal gear train technology. Perfect for larger airplanes and helis, the HS-5645MG will deliver higher resolution and torque than its analog brother.

SPECS

Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points

Dimensions 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Product Weight 2.1oz. (60g)
Output Shaft Style 24 tooth (C1) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.23sec/60°
No-Load Speed (6.0V) 0.18sec/60°
Stall Torque (4.8V) 143oz/in. (10.3kg.cm)
Stall Torque (6.0V) 168 oz/in. (12.1kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Travel per µs (reprogrammed normal res) .133°/μsec
Max Travel (out of box) 119°
Max Travel (reprogrammed normal res) 199°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (4.8V) 8.8mA
Current Drain - idle (6.0V) 9.1mA
Current Drain - no-load (4.8V) 400mA
Current Drain - no-load (6V) 500mA
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 8µs
Motor Type 3 Pole Ferrite
Potentiometer Drive Indirect Drive
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material 3 Metal Gears and 1 Resin Metal Gear
Wire Length 11.81" (300mm)
Wire Gauge 25AWG
TECH TIPS

General Servo Information:

Servo Tech Tip Videos:

PROJECTS

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2019 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.