Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
Dimensions | 1.6" x 0.8"x 1.5" (41 x 20 x 38mm) |
---|---|
Product Weight | 2.1oz (60g) |
Output Shaft Style | 24 tooth (C1) spline |
Voltage Range | 6.0V - 7.4V |
No-Load Speed (6.0V) | 0.20sec/60° |
No-Load Speed (7.4V) | 0.17sec/60° |
Stall Torque (6.0V) | 157oz/in. (8.8kg.cm) |
Stall Torque (7.4V) | 179oz/in. (12.9kg.cm) |
Max PWM Signal Range (Standard) | 750-2250μsec |
Travel per µs (out of box) | .078°/μsec |
Travel per µs (reprogrammed normal res) | .134°/μsec |
Max Travel (out of box) | 116.5° |
Max Travel (reprogrammed normal res) | 200.5° |
Pulse Amplitude | 3-5V |
Operating Temperature | -20°C to +60°C |
Current Drain - idle (6.0V) | 3mA |
Current Drain - idle (7.4V) | 3mA |
Current Drain - no-load (6V) | 200mA |
Current Drain - no-load (7.4V) | 240mA |
Current Drain - stall (6V) | 2A |
Current Drain - stall (7.4V) | 3A |
Continuous Rotation Modifiable | Yes |
Direction w/ Increasing PWM Signal | Clockwise |
Deadband Width | 2µs |
Motor Type | 3-Pole Ferrite (7.4V wind) |
Potentiometer Drive | 6 Slider Indirect Drive |
Feedback Style | 5KΩ Potentiometer |
Output Shaft Support | Dual Ball Bearing MR106 |
Gear Type | Straight Cut Spur |
Gear Material | Metal |
Wire Length | 7" (178mm) |
Wire Gauge | 22AWG |