Shop By Product

HS-8775MG Servo

Discontinued
Discontinued
  • Discontinued
  • HS-8775MG included hardware
  • HS-8775MG back view
  • HS-8775MG top view
  • HS-8775MG with quarter for scale
  • HS-8775MG side view
  • HS-8775MG in box
  • HS-8775MG with a standard servo for scale
1 of 8

Details

This product has been discontinued.  Featuring a coreless motor for smooth operation and faster response time, Hitec's HS-8775MG low profile, digital servo provides high resolution performance to your electric and 1/10th scale nitro vehicles, mid to large size nitro and large scale electric helicopters. Its metal gears and dual ball bearings add to its strength and reliability. Featuring the industry standard 25-tooth output spline, the HS-8775MG is your “go to” servo.

SPECS
Dimensions 1.59” x 0.82” x 1.0” (40.4 x 21x 25.4mm)
Product Weight 1.6oz (45.0g)
Output Shaft Style 25 tooth (H25T) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.12 sec/60°
No-Load Speed (6.0V) 0.10 sec/60°
Stall Torque (4.8V) 99.89 oz/in. (7.2 kg.cm)
Stall Torque (6.0V) 124.98 oz/in. (9.0 kg.cm)
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable No
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Coreless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material Metal
Wire Length 11.81" (300mm)
Wire Gauge 20AWG
TECH TIPS

General Servo Information:

Servo Tech Tip Videos:

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.