Our clamping hubs offer a cheap way to attach hub mount gears or wheels to a shaft. Clamping hubs offer several advantages over set screw hubs. First, they do not damage the shaft which they are attached. Second, they offer more holding power in high torque applications. The disadvantage is that they are not as equally balanced for high speed use. The side clamping machine screw is 6-32 and accepts a 7/64” hex key. These clamping hubs work with our ServoBlocks.
These hubs use a 7/64” Hex Key
6-32 Pan Head Screws
6-32 Socket Head Screws
6-32 Truss Head Screws
6-32 Flat Head Screws
0.770” Clamping Hub Hardware
0.770” Clamping Hubs (3mm - 12mm)
0.770” Clamping Hubs (1/8” - 1/2”)
These hubs utilize a 0.770” hub pattern.
DREAM. DESIGN. BUILD. REPEAT.
8, 10, & 12mm bore hubs
Right click and save.
#545632 STEP FILE
Copyright 1999-2015 Robotzone, LLC - All rights reserved.
ServoCity® is a registered trademark of Robotzone, LLC.
Huge Selection. Low Prices.