Actuator Wiring for switch 2
SD Linear Actuator Front Side

Operating Voltage: 6.0-12 Volts DC
Operating Temperature Range: -20 to +65C -13 to +149F
Operating Speed (12V): 0.33” second at No load
Operating Speed (12V):
0.29” second at Max load
Dynamic Thrust (12V):
1570 lbs. Thrust
Static Load:
3,050 lbs.
Current Drain (12V): 3A operating No load
Motor Type:
3 Pole Ferrite
Potentiometer: I0K
Gear Ratio: 40:1 Ratio
Gear Type: 4 Metal Gears
Connector Wire Length: 12"
Recommended Fuse: 20amp inline
IP Grade: IP 65-total dust protection, water resistant
Duty cycle: 25% (25% on, 75% off)

Detailed Specifications

To get your actuator up and running, apply 6-12VDC to the positive (red) and negative (black) wires. You do not need to do anything with the potentiometer wires (Blue, Yellow, White). The potentiometer wires are only needed if you are building a system which requires you to know the exact position of the actuator piston. For normal operation, we recommend purchasing the switch above and wiring the switch according to the schematic.

Feedback Wiring Schematic:
White - 10K Potentiometer Reference
Blue - 10K Potentiometer Wiper (Position Signal) Yellow - 10K Potentiometer Reference

Price:

 $9.99

Part:

 275-709

Status:

 

Qty:

DPDT 20A Actuator Switch

8”

SDA8-30

172.6 oz.

$399.99

12”

SDA12-30

186.7 oz.

$399.99

 

4”

SDA4-30

142.3 oz.

$399.99

6”

SDA6-30

158.9 oz.

$399.99

 

Stroke

Part #

Weight

Price

Status

Qty

Buy

18”

SDA18-30

200.4 oz.

$399.99

24”

SDA24-30

221.8 oz.

$399.99

 

Actuator Potentiometer Schematic2

 

 1570+ lbs.

 

 0.30 inches per sec.

Super Duty Actuator Schematics 2
SD Linear Actuator
SD Linear Actuator Side View
SD Linear Actuator with Can
Super Duty Actuator wire schematic1

X = Center to Center

Stroke

Retracted

Extended

4”

15.71”

19.73”

6”

17.72”

23.74”

8”

19.72”

27.71”

12”

26.77”

38.78”

18”

32.77”

50.76”

24”

38.78”

62.80”

Powder coated aluminum base
Stainless steel extension rod
Steel protection tube

Features:
-Sealed O-ring
-Durable design for even the          toughest industrial applications
-Clutch overload protection
-Metal gears
-CE Certified (CD55011)

40-1 gear ratio (SDA) table
DMSC6-16-10 small

Move more than 1,500 lbs for under $400! Our super duty linear actuators can be used in place of pneumatics and hydraulics. The super duty linear actuators are driven by high torque brushed DC gearmotors coupled to a ball-screw to create a low friction linear drive. The ball-screw provides efficient linear thrust that can handle loads in both the pushing and pulling orientation. The linear actuators can handle an incredible amount of static load and will hold position even when power is removed. The actuators are equipped with independently adjustable limit switches in the base that will cut power when tripped to prevent over-run. Each actuator has a built-in potentiometer which can be used for positioning feedback if your application requires. The aluminum and steel construction with full metal drive gears ensures tremendous durability and reliability. We offer them in six stroke lengths from 4 inches up to 24 inches. Extension shaft is 1.125” diameter.  Mounting holes are 1/2” diameter and bolt up directly to our optional mounting brackets. Note: These systems are extremely powerful and caution must be used during operation.

The Digital Manual Speed Controller provides proportional forward and reverse control of your linear actuator. Simply supply 6-16V to the controller and plug in your linear actuator. The speed and direction are controlled by the knob.

Share with friends!

Super-Duty-Actuators---all-sizes
STEP-File-Download---right-click-here

SDA4 (4” Stroke) STEP

SDA6 (6” Stroke) STEP

SDA8 (8” Stroke) STEP

SDA12 (12” Stroke) STEP

SDA18 (18” Stroke) STEP

SDA24 (24” Stroke) STEP

Top Border - We have the parts for your ideas!
Bottom border
Top Border - thin black line
ServoCity-We have the parts for your ideas!
Customer_Login
New Products Click Here
Payments we accept
Register
ServoCity_is_Comodo_Secure
Shop Online or Call
Subscribe
View_Shopping_Cart_button
Facebook
Twitter
YouTube
Vimeo
Google Plus
Blog
Pinterest
1570 lbs. Thrust Linear Actuator
ServoCity - Motors & Accessories - 12V Linear Actuators - 1570 lbs. Thrust Linear Actuator -
Actobotics
Servos & Accessories
Motors & Accessories
Servo Controllers
Motor Controllers
Transmitters & Accessories
Pan/Tilt/Roll & Accessories
Camera Accessories
Robots & Accessories
Channel & Brackets
Shafting & Tubing
Hubs, Couplers & Adaptors
Bearings & Bushings
Gears
Sprockets & Chain
Pulleys & Belts
Wheels & Tires
Fasteners & Hardware
Batteries & Power Supplies
Wire/Connectors & Access.
Electronics & Accessories
Tools
Web Specials
Discounts & Promotions
Contact Us
Project Center

Huge Selection. Low Prices.

Copyright 1999-2015 Robotzone, LLC - All rights reserved.
ServoCity® is a registered trademark of Robotzone, LLC.

ServoCity-on-Instagram