Requires a 7/64” Hex Key
DREAM. DESIGN. BUILD. REPEAT.
YOU WILL NEED (1) #555140 FOR EVERY CLAMPING MOUNT ORDERED
You will need (1) #555140 for every clamping motor mount ordered
1/4-20 screw and nylock nut included with #555140.
6-32 x 3/8” pinch bolt included with mounts.
The clamping swivel motor mounts come in 3 sizes (22, 32 and 37mm ID). When attached to the 555140, these motor mounts become extremely versatile and can easily attach to other Actobotics components. The 555140 comes with a ¼-20 socket head screw and a lock-nut to attach a swivel motor mount. By loosening the ¼-20 screw, the mount can be rotated to adjust the position of the motor. To adjust the height of the motor, simply loosen the pinch bolt found on the clamping swivel motor mount and slide the motor body to the desired position. Motor mounts and 555140 are constructed of 6061 T-6 aluminum.
#555148 is compatible with our new Planetary Gearmotors
Right click and save.
Huge Selection. Low Prices.
Copyright 1999-2015 Robotzone, LLC - All rights reserved.
ServoCity® is a registered trademark of Robotzone, LLC.