Whoever said you can’t take it with you? Hitec’s new X1 AC Plus Battery Charger goes everywhere you go. Capable of charging all battery types, this charger is the affordable and portable answer to keeping your batteries charged and ready for action. The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources. Designed to charge NiMH, NiCd, LiPo, Li-Ion and Lead-based batteries, the X1 is the perfect charging solution for your RC hobby. Drivers and pilots alike will appreciate its prices and relish in its dependability.
Battery Types: NiCAD, NiMH, Li-ion, LiPo, LiFe, Pb
Battery Cell Count: 1-15 cell (NiCAD, NiMH)
1-6 LiPo / Li-ion / LiFe cell
Lead-acid cells (2V-20V)
Charge Current: 0.1~6.0A (Max 50W)
Discharging Current: 0.1~1.0A (Max 5W)
Input: DC 11V~18V AC 100V~240V
Dimensions: 5.31” x 4.41” x 2.40”
(153 x 112 x 60.9 mm)
Net Weight: 15.27 oz (433g)
Current Drain for Balancing LiPo: 300mA/cell
- Optimized operating software
- Internal Independent lithium battery
- Balancing individual cells battery
- Adaptable to various types of lithium
- Fast and storage mode
- Maximum safety
- Automatic charging current limit
- Input power monitoring
- and much more (download the user
manual below to learn more)!
LiPo Balancing Adaptor (XH Type)
AC Power Cord
DC Power Cord
Included with the X1 AC Plus Charger:
to download the Hitec X1 Charger Manual
Bare Wire Charge
Copyright 1999-2015 Robotzone, LLC - All rights reserved.
ServoCity® is a registered trademark of Robotzone, LLC.
Huge Selection. Low Prices.