We have the parts for your ideas!
ServoCity- Servos & Accessories- Hitec Servos- HS-5945MG Digital Torque-
HS-5945MG Digital Torque
Shopping Cart Button


181 oz-in.


0.13 sec/60

The HS-5945MG offers the same technology as the HS-5925MG servo but with a lower gear ratio. As you can see from the specifications listed, the servo gains up to 53 oz-in. of torque yet still maintains a very fast transit time of .13 seconds to 60. Coreless motors lack the iron core that standard motors use. The standard iron core is replaced with an expoxy reson that does not have a core at all. Coreless motors are much lighter and offer greater power which is one reason for the HS-5945MG’s amazing 181 oz-in. of torque. Combining this technology with digital circuitry makes for one extremely fast and powerful servo. Special alloy gears called “Alumite” offer tremedous strength yet are lightweight as well.  We offer the HS-5945MG servo in several configurations, 90 stock rotation, 180 modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not necessary.

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.16sec/60 at no load
Operating Speed (6.0V): 0.13sec/60 at no load
Stall Torque (4.8V): 152.75 oz/in. (11kg.cm)
Stall Torque (6.0V): 180.53 oz/in. (13kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 180mA no load operating
Current Drain (6.0V): 3mA/idle and 230mA no load operating
Dead Band Width: 1usec
Motor Type: Coreless
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears, 1 Resin Gear
Connector Wire Length: 8.66" (220mm)
Dimensions: 1.55" x 0.78"x 1.48" (39.4 x 20 x 37.8mm)
Weight: 1.97oz (56g)






 Replaced by the HS-5985MG





Copyright 1999-2011 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.