333 oz-in.


 0.16 sec/60°








Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.20sec/60 degrees at no load
Operating Speed (6.0V): 0.16sec/60 degrees at no load
Stall Torque (4.8V): 266.5 oz/in. (20kg.cm)
Stall Torque (6.0V): 333 oz/in. (24kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 5-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: Metal Gears
Connector Wire Length: 12"
Dimensions: 2.6" x 1.18"x 2.25" (66 x 30 x 57.1mm)
Weight: 4.52oz. (128g)

Detailed Specifications

S3306MG in box
S3306MG included hardware

Click for more information

Uses a Large 4F Spline (25T)

Futaba 4F Spline

Share with friends!

Futaba Servo Accessories

Click on the picture for further information.

Servo Screws

Servo Hardware

Servo Extensions

Servo Arms

Plugs & Pins

Futaba Connector with Pins Set 1.7
Servo Arms Group

Copyright 1999-2015 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.

We have the parts for your ideas!
S3306MG Servo
Customer Login
New Products! - Click Here


View Shopping Cart button
ServoCity on Facebook3
ServoCity on Google Plus
ServoCity on Pinterest1
ServoCity on Twitter2
ServoCity on Vimeo
ServoCity Blog1
ServoCity on YouTube1
ServoCity is Comodo Secure

Huge Selection. Low Prices.