Shop By Product

NeveRest 40 Gear Motor

  • shown attached to 37mm Clamping Swivel Motor Mount (555136)
  • shown attached to Aluminum Motor Mount E (555188)
  • shown attached to Aluminum Motor Mount D (555132)
  • shown attached to 37mm Bore Bottom Tapped Clamping Mount (555116)
  • shown attached to 6mm set screw hub
  • shown attached to 6mm Bore 32P Shaft Mount Pinion Gear
  • shown attached to 6mm clamping hub
1 of 15

Be the first to review this product

Part
638442
638442
Status
In stock
This Product? Share It!

Details

Product Overview:
The NeveRest 40 is a gearmotor with an attached encoder. The output shaft geometry and the gearbox housing diameter is similar to what FTC teams are familiar with. The shaft is 6mm dia and the gearbox housing is 37mm diameter.

This is the same as part 'am-2964' as per the manual, these have the addition of power pole connectors pre-attached!

FTC Legal:
According to the FIRST Tech Challenge Game Manual Part 1, Rule RE09 this is legal for the 2016-2017 FTC Game.

Encoder cables are not included with this motor.  There is an encoder mounted to the back side of this motor. It is a 7 pulse per revolution (ppr), hall effect encoder. Since the motor's gearbox has a 40:1 reduction, then the NeverRest 40 output shaft provides 280 ppr.

SPECS

Physical Specs:

  • Overall Length: 133.5mm (5.26 in)
  • Maximum Diameter: 37mm (1.46 in)
  • Mounting Holes: M3 tapped holes, qty. 6, on a 31mm bolt circle
  • Electrical Connection Geometry: 6-pin connector for motor power and encoder contact
  • Body Material: Steel with plastic encoder housing
  • Lubrication: Included with gearbox
  • Shaft Hardness: 45-50 Rockwell C 

Performance Specs:

  • Gearbox Reduction: 40:1
  • No Load Free Speed, at gearbox output shaft: 160 rpm
  • No Load Free Speed, motor only: 6,600 rpm
  • Gearbox Output Power: 14W
  • Force Needed to Break Gearbox: 1478 oz-in
  • Minimum torque needed to back drive: 12.8 oz-in
Voltage (Nominal) 12V
Speed (No Load)* gearbox output shaft: 160 rpm / motor only: 6,600 rpm
Current (Stall)* 11.5A
Torque (Stall)* 350 oz-in
Gear Ratio 40:1
Gear Material Steel
Gearbox Style Spur
Motor Type Brushed DC
Output Shaft Diameter 6mm with 0.5mm deep flat
Output Shaft Style D-Shaft
Output Shaft Support Bushing
Electrical Connection Power Poles for motor, 4 pin connector for encoder
Wire Length 19.5"
Wire Gauge 18 AWG
Mounting Screw Size M3 x 0.5mm thread
Product Weight 12.16 oz
Encoder: Cycles Per Revolution (Motor Shaft) 7
Encoder: Cycles Per Revolution (Output Shaft) 280
Encoder: Countable Events Per Revolution (Motor Shaft) 28
Encoder: Countable Events Per Revolution (Output Shaft) 1120
RESOURCES

   

Download Attachment
pdfMotor Layout and Specs(44.67 KB )Download
pdfMotor Testing(892.27 KB )Download

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.