Shop By Product

Power Distribution Block

  • Discontinued
  • includes an XT60 connector
1 of 8


This product has been discontinued.  The Hitec Power Distribution Block is designed to be used with the HRC44270 and HRC44266 chargers.  This power distribution block will accept a 6-18V from the XT60 connector on the side and passes that power on to the three sets of banana plugs ports. The banana plug ports each have an adjacent cavity to allow room to alternatively connect an alligator connector.

There are two female USB A-Type connectors which are regulated to the standard USB voltage of 5v. These can be used to charge a smart phone, or power electronic projects.


USB Power: Dual 5 V - 2.1 A

Product Weight 1.62 oz (46 g)
Dimensions 2.51" x 1.73" x 0.89" (63.7 mm x 44 mm x 22.5 mm)
Input Voltage 6 V - 18 V
Max Current (Peak) 10 A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.