Shop By Product

Inspection Rover

By Tony Van Dyke |

In my line of work I spend a lot of time under mobile homes doing repair work. I thought it would be handy to have a camera I could send in to find the problem and maybe save a few extra trips under!

I had some old rc car parts laying around so I started with 2 Tekno SCT 410's.  The chassis were stripped and I modified, cut, stretched, and welded a new chassis with dual front ends.

Note: It takes a good deal of servo and radio programming to get it all to work, especially the 2 wheel, 4wheel, and crab walk steering!

See How to Build This Project on:
Parts List
Add Parts To Cart

( Parts Only)

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2019 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.