Shop By Product

STPA MiniRod

By Jeff Shirley |

STPA R/C Mini Rod class pulling tractor.  The tractor uses Servocity 1/4" shafts, .770 hubs, 1/2"x 1/4" bearings, 16t 5mm pinion and aluminum spur gear.  It took first at R/C pulling Midwest Nationals by over 2'. I run a Castle 6900kv 1406 motor on 3s for power and a mg996 servo handles steering.  The truck weighs 6# and typically pulls 25-30#.  All chassis, front axle and suitcase weights were machined by me.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2019 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.