Shop By Product

S3107 Servo

  • S3107 with quarter for scale
  • S3107 side view
  • S3107 hardware pack
  • S3107 back view
  • S3107 in box
  • S3107 top view
1 of 7

Be the first to review this product

In stock
This Product? Share It!


This is the S3107 Micro Servo from Futaba. This servo is used for R/C Park Flyer airplanes.

Dimensions 9" x 0.4"x .8" (23 x 10 x 20mm)
Product Weight .30oz. (9g)
Output Shaft Style 21 Tooth (2F) Spline
Voltage Range 4.8V
No-Load Speed (4.8V) 0.12sec/60°
Stall Torque (4.8V) 16.7 oz/in. (
Pulse Amplitude 3-5V
Operating Temperature -20 to +60 Degree C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Counter clockwise
Motor Type 3-Pole Motor
Potentiometer Drive Indirect Drive
Output Shaft Support Bronze bearings
Gear Type Straight cut spur
Gear Material Nylon gears
Wire Length 12"
  • This servo cannot be used with gasoline engines or large/middle scale gliders or other models that require torque.
  • Use of 6.0V not recommended as this will shorten servo life. 
  • For replacement servo horn use FUTM2005

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.