Shop By Product

S3111 Servo

  • S3111 Top View
  • S3111 back view
  • S3111 in box
  • S3111 side view
  • S3111 with quarter for scale
  • S3111 included hardware
1 of 7

Be the first to review this product

Part
FUTM0047
FUTM0047
Status
In stock
This Product? Share It!

Details

This is the Futaba S3111 6.6g Micro Servo with J Connector. Compact dimensions and light weight is ideal for Park Flyers and small electric aircraft.
SPECS

Dimensions .86" x 0.43"x .78" (21.8 x 11 x 19.8mm)
Product Weight .23oz. (6.6g)
Output Shaft Style 15 Tooth (1F) Spline
Voltage Range 4.8V
No-Load Speed (4.8V) 0.12sec/60°
Stall Torque (4.8V) 8.3 oz/in. (.6kg.cm)
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable No
Direction w/ Increasing PWM Signal Counter-Clockwise
Motor Type 3 Pole Ferrite
Potentiometer Drive Indirect Drive
Output Shaft Support Top Ball Bearing
Gear Type Straight Cut Spur
Gear Material Nylon
Wire Length 4"
TECH TIPS
  • This servo cannot be used with gasoline engines or large/middle scale gliders or other models that require much torque.
  • Use of 6.0V not recommended as this will shorten servo life. 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2017 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.