Shop By Product

TM-785HB Servo Gearbox

Patented
Patented
  • Patented
  • bottom view
  • top view
1 of 3

Be the first to review this product

Price
$119.98
$119.98 - $149.98
Sign up for Price Alert
Part
TM-785HB Servo Gearbox
TM-785HB Servo Gearbox
Status
In stock

* Required Fields

Price
$119.98
$119.98 - $149.98
Sign up for Price Alert
This Product? Share It!

Details

The TM-785HB Servo Gearbox utilizes the Hitec HS-785HB sail winch servo (included) to create a high-torque Servo Gearbox. The stock Hitec servo can rotate several turns in factory form (approximately 4 turns on most Tx/Rx systems; up to 8 turns with a 650-2350usec signal). When the servo is installed into the gearbox, the total amount of rotation is decreased by the ratio selected but the torque and precision is increased by the ratio. The lower the gear ratio, the more precision and torque it will provide but the speed and amount of rotation will be decreased.  Five different gear ratios are available in order to find the right balance between torque and rotation. Positioning feedback remains since the servo is completely stock and unmodified in any way. The TM-785HB can handle tremendous side loads with the dual ABEC-5 precision ball bearings which support the hardened 3/8” stainless steel shaft. The shaft is hollow with a .290” inner diameter to allow wires from cameras, sensors or other devices to not tangle during multi-rotation movements. The brass pinion gear meshes to a high-grade 7075 aluminum 32 pitch hub gear which is fastened to the output shaft of the gearbox with a 3/8” clamping hub. The .770” clamping hub has 6-32 tapped holes which allow easy attachment of various components.  The frame of the TM-785HB is machined from 6061-T6 aluminum (anodized) and can be mounted using the top-mount tabs which are ¼” thick and have .140” thru-holes (allows a #6 screw to be used).  Patented

* We highly recommend purchasing this unit assembled by our factory.

SPECS

Ratio

Maximum
Rotation

Weight
(oz.)

4.8V Torque
(oz-in)

6.0V Torque
(oz-in)

4.8V Speed  
(sec/60°)

6.0V Speed 
(sec/60°)

2:1

1413°

9.49

306

366

0.56

0.47

3:1

942°

9.45

458

549

0.84

0.70

3.8:1

744°

9.42

580

695

1.06

0.87

5:1

565°

9.45

763

915

1.40

1.17

7:1

404°

9.38

1069

1281

1.96

1.63

Output Shaft Diameter 0.375"
Servo Included Yes
Voltage Range (Recommended) 4.8V -6.0V
Max PWM Signal Range (Standard) 600-2400 μsec
Travel per 1µs Signal Change (Standard Rotation) 1.72°
Max Travel (Standard Rotation) 3096°
Direction w/ Increasing PWM Signal Counter Clockwise
Feedback Style 5KΩ Potentiometer
TECH TIPS

Want to try a different gear ratio on your Servo Power Gearbox?

RatioServo Gear
Teeth
Servo Gear
Part Number
Hub Gear
Teeth
Hub Gear
Part Number

2:1

32T

615290

64T

615194

3:1

24T

615286

72T

615198

3.8:1

20T

615282

76T

615202

5:1

16T

615278

80T

615206

7:1

12T

615274

84T

615210

In closed loop control, the system is self adjusting. Data does not flow one way, it may pass back from a specific amplifier (such as velocity or position) to the start of the control system, telling it to adjust itself accordingly. Many physical systems are closed loop control at the lowest level since the data about velocity and current position modify the output (also position) at consistent rate.  Click here to learn more about closed loop systems.  

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.