Aluminum Motor Mount E

SKU:

DISCONTINUED This product has been discontinued.

Consider This Alternative

This motor mount is compatible with the same motors that are able to mount to the 555188. Note that the holes that allow you to fasten this motor mount to your structure are M4 rather than 6-32 UNC and positioned on the goBILDA pattern.

1702-0032-0001 - 1702 Series Quad Block Motor Mount (32-1)
1702-0032-0001
1702 Series Quad Block Motor Mount (32-1)
$6.99
$5.99
Discontinued

Currently Sold Out

Aluminum Motor Mount E has a plethora of holes, and hence, has a broad compatibility. It is compatible with the following mounting patterns:

M3 x 25mm bolt circle (2 holes): Common mounting pattern in R/C car motors.

M3 x 26mm bolt circle (4 holes): Mounting pattern for many 32mm diameter planetary gear motors such as our HD Premium Planetary Gear Motors.

M3 x 28mm bolt circle (2 holes): Mounting pattern for many 36mm diameter planetary gear motors such as the REV HD Hex Motor and the Andymark Orbital Motor.

M3 x 31mm bolt circle (2 holes, offset 7mm from center): Mounting pattern for many of the 37mm diameter spur gear motors such as our Standard Spur Gear motors, Precision Spur Gear Motors, goBILDA 5200 Series motors, and Andymark Neverest Classic motors.

This mount has four posts with 6-32 threaded holes that will align with holes in the Actobotics Channel. When mounted perpendicular to the channel it will align the motor shaft with the ½" hole in the base of the channel. If you mount this motor mount into the end of the channel it will align the motor shaft with the center cavity of the channel so that you can

Specs

Material Aluminum
Weight 0.34 oz (9.8g)
Finish Clear Anodized

This website uses cookies to ensure you get the best experience on our website