Shop By Product

4900 RPM Micro Gear Motor w/Encoder

  • 12 CPR Magnetic Encoder
  • Shown on a quarter for scale
  • All metal gears
  • Use with our 3mm bore pinion gears
  • Shown with a 3mm to 1/4” set screw shaft coupler
  • The gear motor has a “D” shaped 3mm diameter shaft
  • JST 6-pin connector
1 of 8

Be the first to review this product

Price

Regular Price: $19.99

Special Price $14.99

Sign up for Price Alert
Part
638105
638105
Status
In stock
This Product? Share It!
SPECS

Stalling this gear motor could cause gear damage.

*At Nominal Voltage

Voltage (Nominal) 12V
Voltage Range (Recommended) 6V - 12V
Speed (No Load)* 4900 rpm
Current (No Load)* 120mA
Current (Stall)* 1600mA
Torque (Stall)* 2 oz-in
Gear Ratio 5.067:1
Gear Material Metal
Gearbox Style Straight Cut Spur
Motor Type DC
Output Shaft Diameter 3mm (0.118")
Output Shaft Style D-shaft
Output Shaft Support Brass Case
Electrical Connection ZH Series JST 6-pin connector (1.5mm Pitch)
Operating Temperature -10°C ~ +85°C
Mounting Screw Size M1.6 x 0.35mm
Product Weight 0.4 oz
Encoder: Cycles Per Revolution (Motor Shaft) 3
Encoder: Cycles Per Revolution (Output Shaft) 15.2019
Encoder: Countable Events Per Revolution (Motor Shaft) 12
Encoder: Countable Events Per Revolution (Output Shaft) 60.8077
Encoder Type Relative, Quadrature
Encoder Sensor Type Magnetic (Hall Effect)
RESOURCES

   

Download Attachment
pdfEncoder Spec Sheet(603.65 KB )Download
TECH TIPS

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2019 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.