HS-5065MG Servo
The HS-5065MG High Performance Sub-Micro Servo features Hitec's digital programmable circuit for incredible resolution, centering and holding torque; also featuring metal gears, a top-ball bearing, and nearly 31 oz-in of torque with a quick transit time of 0.11 sec at 6 volts, it will no doubt be the choice for high performance micro helicopters, electric park flyers, 1/18 scale cars, and light duty robotic projects.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
76°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
128°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
128°
Controllers such as the Actobotics® Servo Controller, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
108°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
181°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
181°
Controllers such as the Actobotics® Servo Controller, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
Specs
| Output Shaft Style | B25T Spline |
|---|---|
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.14 sec/60° |
| No-Load Speed (6.0V) | 0.11 sec/60° |
| Stall Torque (4.8V) | 24.99 oz-in (1.8 kg.cm) |
| Stall Torque (6.0V) | 30.55 oz-in (2.2 kg.cm) |
| Max PWM Signal Range | 750-2250μsec |
| Travel per µs (Stock) | .085°/μsec |
| Travel per µs (Reprogrammed) | .121°/μsec |
| Max Rotation (Stock) | 128° |
| Max Rotation (Reprogrammed) | 181° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 3mA |
| Current Drain - idle (6.0V) | 3mA |
| Current Drain - no-load (6V) | 200mA |
| Current Drain - no-load (7.4V) | 240mA |
| Current Drain - stall (4.8V) | 2A |
| Current Drain - stall (6V) | 3A |
| Continuous Rotation Modifiable | No |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 2µs |
| Motor Type | Carbon Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Top Ball Bearing |
| Gear Material | Metal |
| Wire Length | 7" (178mm) |
| Weight | 0.42oz (11.9g) |
| Wire Gauge | 28AWG |
| Servo Size | Sub-Micro |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the HS-5065MG Servo.
goBILDA
