HS-5765MH Servo
When it comes to your big R/C projects, size does matter - that’s why Hitec has engineered the HS-5765MH. This high voltage cousin of their popular HS-5755MG is 2-cell LiPo (7.4V) capable and features heavy duty, metal gears with a 10mm output shaft for the strength you need for the most demanding large scale applications. With 347 oz-in. of torque, the giant HS-5765MH is tough enough to tackle your biggest R/C projects from 1/5th on and off-road vehicles to high-powered boats and giant scale aircraft!
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
74°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
124°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
124°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
123°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
205°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
205°
Controllers such as the Actobotics® Servo Controller, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Features
- Programmable Digital Amplifier with MOSFET Drive
- Durable Heavy-Duty Metal Gears with 1 Metal-Resin Gear
- Triple Ball Bearings
- Metal Servo Arm Included
- Water & Dust Tight
- Super Efficient Heat Sink
- Rigid Horn with Metal Ring
Tech Tips
Specs
| Output Shaft Style | D15T Spline |
|---|---|
| Voltage Range | 6.0V - 7.4V |
| No-Load Speed (7.4V) | 0.13sec/60° |
| No-Load Speed (6.0V) | 0.16sec/60° |
| Stall Torque (6.0V) | 277.74 oz-in. (20 kg.cm) |
| Stall Torque (7.4V) | 347.17 oz-in. (25 kg.cm) |
| Max PWM Signal Range | 750-2250μsec |
| Travel per µs (Stock) | .083°/μsec |
| Travel per µs (Reprogrammed) | .137°/μsec |
| Max Rotation (Stock) | 124° |
| Max Rotation (Reprogrammed) | 205° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Motor Type | 3 Pole Ferrite |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Triple Ball Bearing |
| Gear Material | 1 Resin, 3 Metal Gears |
| Wire Length | 11.81" (300mm) |
| Weight | 6.07 oz (172g) |
| Wire Gauge | 22AWG |
| Servo Size | Large |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the HS-5765MH Servo.
goBILDA
