The HS-5805MG is the digital sibling of the HS-805MG and just like the HS-805MG it was designed to handle the punishment dished out by the latest wave of large scale r/c vehicles. The digital circuit adds massive holding torque and the ability to program the servo to fit your application.
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
Dimensions | 2.59" x 1.18"x 2.26" (66 x 30 x 57.6mm) |
---|---|
Product Weight | 6.95 oz. (197g) |
Output Shaft Style | 15 tooth (D1) spline |
Voltage Range | 4.8V - 6.0V |
No-Load Speed (4.8V) | 0.19sec/60° |
No-Load Speed (6.0V) | 0.14sec/60° |
Stall Torque (4.8V) | 274.96 oz/in. (19.8kg.cm) |
Stall Torque (6.0V) | 343.01 oz/in. (24.7kg.cm) |
Max PWM Signal Range (Standard) | 750-2250μsec |
Travel per µs (out of box) | .079°/μsec |
Travel per µs (reprogrammed normal res) | .131°/μsec |
Max Travel (out of box) | 119° |
Max Travel (reprogrammed normal res) | 197° |
Pulse Amplitude | 3-5V |
Operating Temperature | -20°C to +60°C |
Current Drain - idle (4.8V) | 8mA |
Current Drain - idle (6.0V) | 8.7mA |
Current Drain - no-load (4.8V) | 700mA |
Current Drain - no-load (6V) | 830mA |
Continuous Rotation Modifiable | Yes |
Direction w/ Increasing PWM Signal | Clockwise |
Deadband Width | 8µs |
Motor Type | 3 Pole Ferrite |
Potentiometer Drive | Indirect Drive |
Feedback Style | 5KΩ Potentiometer |
Output Shaft Support | Dual Ball Bearings |
Gear Type | Straight Cut Spur |
Gear Material | 4 Metal Gears and 1 Heavy Duty Nylon Gear |
Wire Length | 11.81" (300mm) |
Wire Gauge | 22AWG |