Shop By Product

HS-7955TG Servo

  • HS-7955TG with quarter for scale
  • HS-7955TG top view
  • HS-7955TG included
  • HS-7955TG in box
  • HS-7955TG back view
  • HS-7955TG side view
1 of 7

Be the first to review this product

$99.99 - $129.99
Sign up for Price Alert
Out of stock
This Product? Share It!


This product has been discontinued on ServoCity.

Hitec's best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of Hitec's G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333 oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.


Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)

Dimensions 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Product Weight 2.29oz (65g)
Output Shaft Style 24 tooth (C1) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.19 sec/60°
No-Load Speed (6.0V) 0.15 sec/60°
Stall Torque (4.8V) 250oz/in. (
Stall Torque (6.0V) 333oz/in. (
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .080°/μsec
Travel per µs (reprogrammed normal res) .133°/μsec
Travel per µs (reprogrammed high res) .074°/μsec
Max Travel (out of box) 120°
Max Travel (reprogrammed normal res) 199.5°
Max Travel (reprogrammed high res) 110.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (4.8V) 9mA
Current Drain - idle (6.0V) 9mA
Current Drain - no-load (4.8V) 220mA
Current Drain - no-load (6V) 300mA
Current Drain - stall (4.8V) 3.4A
Current Drain - stall (6V) 4.2A
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 1µs
Motor Type Coreless Carbon Brush
Potentiometer Drive 6 Slider Indirect Drive
Internal Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings MR106
Gear Type Straight Cut Spur
Gear Material Titanium
Wire Length 7" (178mm)
Wire Gauge 22AWG

General Servo Information:

Servo Tech Tip Videos:

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2020 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.