Special Features:
- Constant torque output: Revolutionary circuit and motor designs allow the HSB-9XXX Series servos to maintain their speed in a more consistent manner, regardless of load.
- Hybrid MPD 1st Gear: Unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle
- Custom NeuMotor: Designed by Steve Neu exclusively for the HSB-9XXX Series, these high performance, brushless motors provide long-standing durability and performance.
Brushless Advantages:
- At least FIVE TIMES longer-lasting than brushed servos.
- 30% faster response times.
- Greater resistance to jolts and vibration.
- Smoother operation.
- Same power consumption as brushed digital servos.
- Same compact case size as standard servos.
- Exceptionally durable geartrain.
- Smooth dual ball bearings
PLEASE NOTE: While compatible with most radio control devices, the regenerative braking feature of the HSB-93XX series servos may cause a problem if the device cannot accept a backflow of current. The types of devices that cannot accept this backflow are: Voltage Regulators, Power Safe Receivers and certain BEC circuits whether stand alone or integrated within an Electronic Speed Control. Check with the manufacturer or the Hitec website for a list of compatible models. If your device cannot accept a current backflow, then you must install a PAD (Power Absorbing Device - Hitec PN# 55756) as described in the manual. A PAD is included with every Hitec brushless servo.
Dimensions | 1.57” x 0.78” x 1.45” (40 x 20 x 37mm) |
---|---|
Product Weight | 2.19oz (62g) |
Output Shaft Style | 25 tooth (H25T) spline |
Voltage Range | 6.0V - 7.4V |
No-Load Speed (6.0V) | 0.13 sec/60° |
No-Load Speed (7.4V) | 0.10 sec/60° |
Stall Torque (6.0V) | 269 oz/in. (19.4 kg.cm) |
Stall Torque (7.4V) | 269 oz/in. (19.4 kg.cm) |
Max PWM Signal Range (Standard) | 700-2300μsec |
Travel per µs (out of box) | .076°/μsec |
Max Travel (out of box) | 121° |
Pulse Amplitude | 3-5V |
Operating Temperature | -20°C to +60°C |
Continuous Rotation Modifiable | No |
Direction w/ Increasing PWM Signal | Clockwise |
Deadband Width | 2µs |
Motor Type | Brushless |
Internal Feedback Style | 5KΩ Potentiometer |
Output Shaft Support | Dual Ball Bearings |
Gear Type | Straight Cut Spur |
Gear Material | Steel |
Wire Length | 11.81" (300mm) |
Wire Gauge | 20AWG |