MDB1200WP Servo
Hitec's MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor, and IP67-certified water and dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
90°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
120°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
120°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
124°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
165°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
165°
Controllers such as the Servo Commmander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Specs
| Weight | 260g |
|---|---|
| Output Shaft Style | D15T Spline |
| Voltage Range | 4.8V ~ 8.4V |
| No-Load Speed (6.0V) | 0.22sec/60° |
| No-Load Speed (7.4V) | 0.18sec/60° |
| Stall Torque (6.0V) | 100.0 kg.cm (1,388 oz-in) |
| Stall Torque (7.4V) | 110.0 kg.cm (1,527 oz-in) |
| No-Load Current (6.0V) | 500mA |
| No-Load Current (7.4V) | 550mA |
| Stall Current (6.0V) | 5,000mA |
| Stall Current (7.4V) | 4,300mA |
| Max Rotation | 120° |
| Max Rotation (Reprogrammed) | 165° |
| Max PWM Range | 900 - 2100 µsec |
| Travel per µsec | 0.10°/µsec |
| Travel per µsec (Reprogrammed) | 0.14°/µsec |
| Direction | Clockwise |
| Deadband Width | 2µsec |
| Motor Type | Brushless |
| Feedback Style | Magnetic Encoder |
| Output Shaft Support | Dual Ball Bearings |
| Gear Material | Steel |
| Wire Length | 300mm (11.81") |
| Wire Gauge | 20AWG |
| Connector Type | 3-Pos TJC8 Servo Connector [MH-FC] |
| Size | Large |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the MDB1200WP Servo.
