Shop By Product

PWM Meter

  • Shown mounted inside channel.
  • It does not matter which set of pins you use.
  • Works well with microcontrollers such as Arduinos.
  • Optionally pass the signal along to a servo (or other device) via the other set of pins.
  • Works well with RC receivers.
1 of 8

Be the first to review this product

Part
605037
605037
Status
In stock
This Product? Share It!

Details

Need to know what PWM signal your receiver, robot or servo controller is sending? Simply plug in our PWM Meter to see a readout of the PWM signal in microseconds (µsec). If you wish to pass that signal on to your servo or device, just plug into the other set of header row pins.

SPECS

PWM Meter schematic

Product Weight 0.20 oz
Input Supply Voltage Range 4V - 15V
Current Drain 55mA @6V
PWM Signal Range 0 - 9999 µsec
PWM Signal Resolution 1 µsec
TECH TIPS

Both sets of pins are electrically connected. This means you can use either set to plug your source signal in. It also means that whichever set you do not use for the input can be used as an output to pass the signal and power along to a servo or other device.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2017 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.