SB2264MG Low Profile High Voltage Brushless Servo


The SB2264MG combines leading edge technology with super high 12 bit (4096) resolution. It is ideal for 1/10 scale on-road  and off-road RC vehicles as well as helis. The aluminum case and brushless motor provides longer life and cooler operating temps.

How Far Will This Servo Rotate?

The answer to this question is partially dependant on what you are using to control the servo.
Click for a quick video explanation.

With an Average Radio System:
Your average transmitter and receiver will output a relativly narrow PWM signal range.

Radio System + Servo Stretcher:
Adding a Servo Stretcher to your radio system setup will allow you to achieve wide PWM signal ranges.

Wide Signal Controllers:
Controllers such as the Actobotics® Servo Controller, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.

Tech Tips


Output Shaft Style H25T Spline
Voltage Range 6.0V ~ 7.4V
No-Load Speed (7.4V) 0.085 sec/60°
No-Load Speed (6.0V) 0.11 sec/60°
Stall Torque (6.0V) 166.8 oz-in (12.0
Stall Torque (7.4V) 208.3 oz-in (15.0
Pulse Amplitude 3-5V
Operating Temperature -10°C to 50°C
Current Drain - idle (6.0V) 5mA
Current Drain - idle (7.4V) 5mA
Current Drain - no-load (6V) 180mA
Current Drain - no-load (7.4V) 220mA
Current Drain - stall (6V) 2900mA (2.9A)
Current Drain - stall (7.4V) 3700mA (3.7A)
Motor Type Brushless
Output Shaft Support Dual Ball Bearings
Gear Material Stage 1: Steel Pinion, Aluminum Spur
Stage 2: Steel Pinion, Brass Spur
Stage 3: Steel Pinion, Brass Spur
Stage 4: Steel Pinion, Brass Spur
Stage 5: Steel Pinion, Steel Output
Wire Length 11.5" (292.1mm)
Weight 2.01oz (57g)
Wire Gauge 22 AWG
Servo Size Low Profile
(Fits Standard Size Mounts)
Max Rotation 160°
Travel per µs 0.09°/µsec
Max PWM Signal Range 600-2400μsec

This website uses cookies to ensure you get the best experience on our website