Spur Gear Motor Mount G

This motor mount is specifically for spur gear motors that have an OD of 37mm and a 31mm mounting hole circle.  When the motor is installed it locates the offset shaft of the gear motor so that it's concentric with the Actobotics hub patterns (both the 0.770" and 1.50").  The overall part thickness is 7mm so that the bushing protruding from the gear box will sit just under the mounting surface of the motor mount.  The included 6 screws (M3 x 6mm length) will be used to solidly fasten the mount to the face of the gear box.  The mount is then able to fasten to any Actobotics component which has thru-holes.