0.250" Bore Clamping D-Hub (Tapped), 0.770" Pattern


This 1/4" D-Bore Clamping Hub is a perfect match to the Actobotics ¼" D-Shafting.  By matching the bore profile to the shaft profile, it creates a positive drive and maximum holding power.  While the bore alone will allow the hub to spin with the shaft, the pinch bolt will constrict the hub down onto the shaft and constrain it from moving axially on the shaft. 



Bore 0.250"
Material Aluminum
Finish Clear Anodized
Weight 0.30 oz (8.6g)