1" Bore, Face Tapped Heavy Duty Clamping Hub, 1.50" Pattern


This 1" clamping hub is for extreme applications.  Whereas most of the hubs use 6-32 screws, this monster utilizes a ¼-20 pinch bolt and the 1.5" hub pattern has a mix of ¼" thru-holes and ¼-20 threaded holes.  This is the same hub as found on our PT-2100 pan and tilt as well as the BD610 belt drive pan system.


Material Aluminum
Weight 1.53 oz (43.4g)
Finish Clear Anodized