Shop By Product

130 RPM Micro Gear Motor w/Encoder

  • Shown with a 3mm to 1/4” set screw shaft coupler
  • The gear motor has a “D” shaped 3mm diameter shaft
  • All metal gears
  • Shown on a quarter for scale
  • Use with our 3mm bore pinion gears
  • 12 CPR Magnetic Encoder
  • JST 6-pin connector
1 of 8

Be the first to review this product


Regular Price: $19.99

Special Price $14.99

Sign up for Price Alert
In stock
This Product? Share It!

Stalling this gear motor could cause gear damage.

*At Nominal Voltage

Voltage (Nominal) 12V
Voltage Range (Recommended) 6V - 12V
Speed (No Load)* 130 rpm
Current (No Load)* 70mA
Current (Stall)* 1600mA
Torque (Stall)* 50 oz-in
Gear Ratio 210.591:1
Gear Material Metal
Gearbox Style Straight Cut Spur
Motor Type DC
Output Shaft Diameter 3mm (0.118")
Output Shaft Style D-shaft
Output Shaft Support Brass Case
Electrical Connection ZH Series JST 6-pin connector (1.5mm Pitch)
Operating Temperature -10°C ~ +85°C
Mounting Screw Size M1.6 x 0.35mm
Product Weight 0.4 oz
Encoder: Cycles Per Revolution (Motor Shaft) 3
Encoder: Cycles Per Revolution (Output Shaft) 631.7719
Encoder: Countable Events Per Revolution (Motor Shaft) 12
Encoder: Countable Events Per Revolution (Output Shaft) 2,527.0874
Encoder Type Relative, Quadrature
Encoder Sensor Type Magnetic (Hall Effect)


Download Attachment
pdfEncoder Spec Sheet(603.65 KB )Download

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2019 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.