Shop By Product

15 Tooth Pinion Pulley

  • Six different bore sizes available.
  • shown attached to clamping mount and tubing
  • shown attached to XL timing belt inside aluminum channel
  • shown attached to shafting inside 1.50" aluminum channel
  • shown attached to Dual Ball Bearing Hub
1 of 10

Be the first to review this product

Part
15 Tooth Pinion Pulley
15 Tooth Pinion Pulley
Status
In stock

* Required Fields

This Product? Share It!

Details

These 15 tooth pulleys are able to run inside of our aluminum channel. The pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. The pulley can be used for building pan and tilt systems, camera sliders, XY tables, robotic drive mechanisms, etc.

The 6mm Bore XL Series (1/5 pitch) Pinion Pulleys can attach directly to any of our gear motors that have a 6mm output shaft. Simply slide the pulley onto the motor shaft and tighten the 10-32 set screw, using a 3/32 hex key. The 1/4” Bore pulleys can attach directly to our 1/4” shafts. The 4mm Bore pulley is compatible with our 4mm shafting or our Premium Planetary Gear Motors. The 5mm, 8mm and 12mm bore pulleys are compatible with our metric shafting of the same size. Use these pulleys in conjunction with our XL series timing belt.  These pinion pulleys use a 3/32” Hex Key (sold separately).

SPECS
Material Aluminum
Shaft Mount Style 10-32 Set Screw
Max Timing Belt Width 0.375" (3/8)
Tooth Count 15
RESOURCES

   

Download Attachment
zip615420 assembly STEP(612.24 KB )Download
zip615424 assembly STEP(821.76 KB )Download
zip615428 assembly STEP(482.8 KB )Download
zip615430 assembly STEP(417.4 KB )Download
zip615432 assembly STEP(567.13 KB )Download
zip615434 assembly STEP(570.35 KB )Download

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.