Shop By Product

C1 Spline Servo to 1/4" Shaft Coupler (Set Screw)

Patented
Patented
  • Patented
  • spline side down
  • shown mounted on a <a href="/servos/hitec-servos">Hitec servo </a> and <a href="/0-250-1-4-stainless-steel-d-shafting">d-shafting</a>
1 of 4

Details

This servo to shaft coupler is intended to fasten a 1/4" shaft to the output spline of a servo that has a 24 Tooth (C1) Spline. The coupler fastens to the servo by installing the stock servo screw down through the center of the part prior to inserting a 1/4" shaft into the bore. For a solid connection between the coupler and a shaft, we recommend that you use a 1/4" D-shaft so that the set-screw is able to tighten down on the flat and reduce any chance slippage. For round profile shafts we do offer a similar coupler that clamps around the shaft rather than using a set-screw. Patented.

SPECS

Uses C1 Standard Spline
C1 Hitec Spline2

 525134

Product Weight 0.20 oz
Material Brass
Coupling Style Set Screw
Bore 0.250"
Servo Spline Compatibility 24 Tooth (C1) Spline
RESOURCES
TECH TIPS

The 10-32 set screw requires a 3/32” Hex Key (sold separately)

PROJECTS

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2017 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.