Shop By Product

4.00" Foam Wheel (2 pack)

  • shown attached to aluminum channel
1 of 5

Be the first to review this product

Part
4TMD
4TMD
Status
In stock
This Product? Share It!

Details

These foam wheels utilize a 0.625” hub pattern. In order to adapt these wheels to other ServoCity components (clamping hubs, servo hubs, etc) that have the 0.770” pattern you will need to purchase the .770 - .625 Hub Adaptor.

SPECS
Product Weight 0.19 oz
Material foam
Hole Pattern 0.625"
Outside Diameter 4.00"
Width 1.50"
RESOURCES
TECH TIPS

These foam wheels utilize a 0.625” hub pattern. In order to adapt these wheels to other ServoCity components (clamping hubs, servo hubs, etc) that have the 0.770” pattern you will need to purchase the .770 - .625 Hub Adaptor.

Helpful Wheel Formulas:

X = Wheel Diameter
Y = Motor RPM

inches / second = XY(3.14159) / 60
feet / second = XY(3.14159) / 720
miles per hour (MPH) = XY(3.14159) / 1056

Example: X= 4” Wheel Diameter
Y = 20 RPM Motor

inches / second = 4 x 20 x 3.14159 / 60 = 4.19 in/sec
feet / second = 4 x 20 x 3.14159 / 720 = 0.35 ft/sec
miles per hour (MPH) = 4 x 20 x 3.14159 / 1056 = 0.238 MPH

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.