Shop By Product

4.5” x 12” Aluminum Pattern Plate

  • shown attached to pillow blocks and shafting
  • shown attached to standoffs and a Hitec servo
  • use 90° Dual Side Mounts to join to panels at a 90° angle
  • easily create enclosed structures for a robot chassis, an electronics compartment or an animatronics application
  • easily create enclosed structures for a robot chassis, an electronics compartment or an animatronics application
  • easily create enclosed structures for a robot chassis, an electronics compartment or an animatronics application
  • easily create enclosed structures for a robot chassis, an electronics compartment or an animatronics application
  • available in 3 sizes
  • Stainless Steel Channel Connector Plates make a strong flat joint between two panels
  • great for creating flat mounting platforms for camera dollies, sliders and cable cams
  • use a swivel hinge to create a moveable joint between two panels
  • great for creating flat mounting platforms for camera dollies, sliders and cable cams
1 of 20

Be the first to review this product

Part
585004
585004
Status
In stock
This Product? Share It!

Details

Easily create enclosed structures for a robot chassis, an electronics compartment or an animatronics application.

SPECS

Standard-Schematic-Flat-Channel-Bracket

Product Weight 0.35 lbs
Material Aluminum
Length 12"
Width 4.5"
Thickness 0.09"
Hole Pattern 0.770" and 1.50"
Pattern Repetition 3x8
Pattern Spread 1.5"
RESOURCES

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.