Shop By Product

6V, 3A Power Supply

1 of 1

Be the first to review this product

Out of stock
This Product? Share It!

Input Frequency Range: 50 – 60Hz
Output Regulation: 5.7V – 6.3V Output Load Range: 0 – 3A
Operating/Storage Temperature: 0ºC ~+40ºC/ -20ºC~+70ºC
Operating/Storage Humidity: 20%~80%RH/10%~90%RH
Protection: Over Voltage/Short Circuit
Meets Energy Efficiency Level V Standards

Product Weight 0.6 lbs
Input Supply Voltage Range 100VAC – 240VAC
Input Plug Style USN
Output Connector Style 2.5mm ID x 5.5mm OD DC Power Plug
Output Voltage +6V / 0 ~3000mA Regulated

When using a power supply in place of a battery, make sure that the amperage is equal to or greater than the amp draw of the item you intend to power. If the amp rating of the power supply is lower than the item it is powering the performance will be diminished. For example, if you power a 12V motor with 400oz-in of torque and an amp draw of 5A with a 12V, 2.5A power supply, the motor will not be able to exert the full 400 oz-in of torque since it requires more than 2.5A to do so. It is okay, however, to have a power supply that is rated for more amps than what the item you intend to power will draw. This will not harm it in any way since electronic devices only pull the necessary amps from the power source. Some power supplies will also vary between their rated voltage and true voltage output. Before plugging a power supply in, it is always a good idea to check the true voltage output so that you do not accidentally damage the components that you wish to power.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.