DB951WP Servo
Superior performance. Extraordinary precision. The DB951WP delivers 528 oz-in of torque with blistering speeds of 0.10 sec/60° @ 7.4 volts, housed in a fully waterproof, CNC-machined aluminum case with hardened steel gears and a brushless motor. Built to dominate off-road R/C, crawlers, giant-scale aircraft, and 600+ helis, this servo is ready for anything you throw at it. No compromises, no limits—just pure performance!
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
90°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
170°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
170°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
199°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
265°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
265°
Controllers such as the Servo Commmander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Specs
| Weight | 90g |
|---|---|
| Output Shaft Style | H25T Spline |
| Voltage Range | 4.8V ~ 8.4V |
| No-Load Speed (6.0V) | 0.12sec/60° |
| No-Load Speed (7.4V) | 0.10sec/60° |
| Stall Torque (6.0V) | 38.0 kg.cm (527 oz-in) |
| Stall Torque (7.4V) | 38.0 kg.cm (527 oz-in) |
| No-Load Current (6.0V) | 350mA |
| No-Load Current (7.4V) | 350mA |
| Stall Current (6.0V) | 8,000mA |
| Stall Current (7.4V) | 6,500mA |
| Max Rotation | 170° |
| Max Rotation (Reprogrammed) | 265° |
| Max PWM Range | 650 - 2350 µsec |
| Max PWM Range (Reprogrammed) | 900 - 2100 µsec |
| Travel per µsec | 0.1°/µsec |
| Travel per µsec (Reprogrammed) | 0.22°/µsec |
| Direction | Clockwise |
| Deadband Width | 1µsec |
| Motor Type | Brushless |
| Feedback Style | Potentiometer |
| Output Shaft Support | Dual Ball Bearings |
| Gear Material | Steel |
| Wire Length | 300mm (11.81") |
| Wire Gauge | 20AWG |
| Connector Type | 3-Pos TJC8 Servo Connector [MH-FC] |
| Servo Size | Standard |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the DB951WP Servo.
