Shop By Product

Aluminum Robot Shocks (2 pack)

sold in pairs
sold in pairs
  • sold in pairs
  • mount easily to aluminum beams
  • mount on the outside or inside of channel
  • shown with 6-32 threaded standoffs used to mount the shocks
  • we recommend using 6-32 x 3/8” threaded spacers (#633120) or longer to space the shocks off from flat surfaces like channe
  • use a Beam Block B pack to mount these shocks to channel
1 of 13

Be the first to review this product

In stock
This Product? Share It!


Our 130mm, oil-filled, aluminum shocks are the perfect solution for incorporating a suspension setup into your Actobotics project! The shock body is threaded so that you can adjust the spring tension simply by rotating the spring perch. Progressive rate springs allow you to dial-in just the right amount of pressure. Both ends incorporate a 0.140” bore ball swivel so that you can mount the shocks at various angles for smooth operation without binding. The long 1.45” stroke length means you can maximize the moment arm. The shocks can easily be disassembled for cleaning or adding various viscosity’s of oil to change the dampening. We recommend using 6-32 x 3/8” long standoffs to space the shock body properly when mounting to flat surfaces.


Minimum Preload: 4 lbs
Maximum Preload: 6.4 lbs


Product Weight 0.80 oz each

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2020 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.