D951TW Servo

Hitec’s D-Series servo line sets new standards for advanced, programmable technology. Powered by their 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science, these powerhouses dominate the servo arena. Their potent combination of wide voltage capabilities, high resolution, rapid response, and patented Smart Sense technology brings maximum performance to all radio control applications. The members of this particular D-Series group are all designed with extremely durable titanium gears; and the D941TW, D946TW and D951TW trio boast full metal cases. When you demand ultimate reliability and unprecedented advanced engineering, look to the power of the D-Series servos!

How Far Will This Servo Rotate?

The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.

Stock:

With an Average Radio System:
86°
Your average transmitter and receiver will output a relatively narrow PWM signal range.

Radio System + Travel Tuner:
144°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.

Wide Signal Controllers:
144°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.

Reprogrammed:

Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.

With an Average Radio System:
118°
Your average transmitter and receiver will output a relatively narrow PWM signal range.

Radio System + Travel Tuner:
198°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.

Wide Signal Controllers:
198°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.

Features

  • High Response Circuitry
  • Wide Voltage Capabilities
  • 32-Bit MCU Technology
  • Full Programmability
  • Smart Sense Technology for Servo Analytics
  • 25-Tooth Output Spline

Programmable Features

  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Soft Start Rate
  • Overload Protection
  • Data Save / Load
  • Program Reset

Tech Tips

Specs

Output Shaft Style H25T Spline
Voltage Range 4.8 V - 7.4 V
No-Load Speed (7.4V) 0.14 sec/60°
No-Load Speed (4.8V) 0.23 sec/60°
No-Load Speed (6.0V) 0.17 sec/60°
Stall Torque (4.8V) 292 oz-in. (21.0 kg.cm)
Stall Torque (6.0V) 403 oz-in. (29.0 kg.cm)
Stall Torque (7.4V) 486 oz-in. (35.0 kg.cm)
Max PWM Signal Range 750-2250 μsec
Pulse Amplitude 3-5 V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 1 µs
Motor Type Coreless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Material Titanium
Wire Length 11.81" (300 mm)
Weight 2.4 oz (68 g)
Wire Gauge 20 AWG
Servo Size Standard
Max Rotation (Stock) 144°
Max Rotation (Reprogrammed) 198°
Travel per µs (Stock) 0.096°/μsec
Travel per µs (Reprogrammed) 0.132°/μsec

This website uses cookies to ensure you get the best experience on our website