DB950SW Servo
The new Brushless DB950SW is the latest addition to Hitec’s DB-Series servo line. All Hitec DB-Series servos have been designed using cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, along with an ultra efficient and powerful brushless motor, these servos deliver significantly smoother movement. This powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. This servo features an industry standard 25-tooth output spline with a 3mm hex screw and steel gears for maximum durability.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
91°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
132°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
132°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
151°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
185°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
185°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Specs
| Weight | 90g |
|---|---|
| Output Shaft Style | H25T Spline |
| Voltage Range | 4.8V ~ 8.4V |
| No-Load Speed (4.8V) | 0.23sec/60° |
| No-Load Speed (6.0V) | 0.17sec/60° |
| No-Load Speed (7.4V) | 0.14sec/60° |
| Stall Torque (4.8V) | 35.0 kg.cm (486 oz-in) |
| Stall Torque (6.0V) | 40.0 kg.cm (555 oz-in) |
| Stall Torque (7.4V) | 40.0 kg.cm (555 oz-in) |
| No-Load Current (4.8V) | 350mA |
| No-Load Current (6.0V) | 350mA |
| No-Load Current (7.4V) | 350mA |
| Stall Current (4.8V) | 5,000mA |
| Stall Current (6.0V) | 5,000mA |
| Stall Current (7.4V) | 4,200mA |
| Max Rotation | 132° |
| Max Rotation (Reprogrammed) | 185° |
| Max PWM Range | 850 - 2150 µsec |
| Max PWM Range (Reprogrammed) | 950 - 2050 µsec |
| Travel per µsec | 0.10°/µsec |
| Travel per µsec (Reprogrammed) | 0.17°/µsec |
| Direction | Clockwise |
| Deadband Width | 1µsec |
| Motor Type | Brushless |
| Feedback Style | Potentiometer |
| Output Shaft Support | Dual Ball Bearings |
| Gear Material | Steel |
| Wire Length | 300mm (11.81") |
| Wire Gauge | 20AWG |
| Connector Type | 3-Pos TJC8 Servo Connector [MH-FC] |
| Servo Size | Standard |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the DB950SW Servo.
