HS-5055MG Servo
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
75°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
126°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
126°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
119°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
178°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
178°
Controllers such as the Servo Commmander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Point
- Fail Safe On/Off
- Fail Safe Points
- Overload Protection (default is off)
Specs
| Output Shaft Style | A15T Spline |
|---|---|
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.20 sec/60° |
| No-Load Speed (6.0V) | 0.17 sec/60° |
| Stall Torque (4.8V) | 18.05 oz-in (1.3 kg.cm) |
| Stall Torque (6.0V) | 22.2 oz-in (1.6 kg.cm) |
| Max PWM Signal Range | 750-2250μsec |
| Travel per µs (Stock) | .084°/μsec |
| Travel per µs (Reprogrammed) | .119°/μsec |
| Max Rotation (Stock) | 126° |
| Max Rotation (Reprogrammed) | 178° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 8mA |
| Current Drain - no-load (4.8V) | 120mA |
| Continuous Rotation Modifiable | No |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 2µs |
| Motor Type | Carbon Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Plastic Bushing |
| Gear Material | Metal |
| Wire Length | 7" (178mm) |
| Weight | 0.33oz (9.5g) |
| Wire Gauge | 28AWG |
| Servo Size | Sub-Micro |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the HS-5055MG Servo.
