HS-7955TG Servo
Hitec's best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of Hitec's G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333 oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
72°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
120°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
120°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
119°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
199°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
199°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Programable Features
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
Tech Tips
Specs
| Output Shaft Style | C24T Spline |
|---|---|
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.19 sec/60° |
| No-Load Speed (6.0V) | 0.15 sec/60° |
| Stall Torque (4.8V) | 250oz-in. (18kg.cm) |
| Stall Torque (6.0V) | 333oz-in. (24kg.cm) |
| Max PWM Signal Range | 750-2250μsec |
| Travel per µs (Stock) | .080°/μsec |
| Travel per µs (Reprogrammed) | .133°/μsec |
| Max Rotation (Stock) | 120° |
| Max Rotation (Reprogrammed) | 199° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 9mA |
| Current Drain - idle (6.0V) | 9mA |
| Current Drain - no-load (4.8V) | 220mA |
| Current Drain - no-load (6V) | 300mA |
| Current Drain - stall (4.8V) | 3.4A |
| Current Drain - stall (6V) | 4.2A |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 1µs |
| Motor Type | Coreless Carbon Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Dual Ball Bearings MR106 |
| Gear Material | Titanium |
| Wire Length | 7" (178mm) |
| Weight | 2.29oz (65g) |
| Wire Gauge | 22AWG |
| Servo Size | Standard |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the HS-7955TG Servo.
goBILDA
